Nuu A9L S6303L Flash Firmware - EMMC FIX

Nuu A9L S6303L Flash Firmware

Nuu A9L S6303L is a Smartphone Model Manufactured by Symphony Mobile, a Bangladeshi Smartphone Brand. If you are experiencing issues with your and believe a firmware update is necessary, it is recommended to Check the Manufacturer’s website for official Firmware Updates and instructions on how to install them. It is also important to be cautious when installing Firmware Updates, As installing an Incorrect Firmware Version can Cause Further Problems with your Device.


Compatible with AT&T and T-Mobile networks and their MVNO networks. Sim card not included. Please check with your carrier directly for more information on their Bring Your Own Device program compatibility. (Not compatible with Verizon or with CDMA Networks like Sprint and Boost Mobile)
With an ultra-large 6.3” display and screen-to-body ratio of 85%, A9L is even more dynamic, pocket friendly, and accessible than ever before.
A quad-core MediaTek processor, 3GB of RAM, and 32GB of storage allow you to multitask between social media, games and streaming seamlessly. Storage is expandable up to 512GB by inserting a microSD card (microSD card not included).
Capture your most precious moments with 5MP rear cameras with dual flash. The 2MP front camera allows you to take a selfie anytime and anywhere.
A9L sports a 3,000mAh long-lasting battery, easily powering all your daily activities.
Android 11 gives you a much more personalized experience as the OS can be customized to your own phones, as well as new features such as intelligent device control and battery privacy functionality.
TPU case is included in the packaging, which can provide you with decent drop protection.

Nuu A9L Hang Logo Dade Recovery Fix

  1. If your device is stuck on the “hang logo” screen and you’re unable to access the device’s recovery mode, you may need to perform a factory reset or a firmware update to fix the issue. Here are some general steps by steps you can take:
  2. Boot into Recovery Mode: If possible, try to boot your device into recovery mode by holding down the appropriate key combination (usually power + volume down/up) when the device is powered off.
  3. Wipe Cache Partition: Once in recovery mode, try wiping the cache partition to clear any temporary system files that may be causing the issue.
  4. Factory Reset: If wiping the cache partition doesn’t work, you may need to perform a factory reset. This will erase all data on the device, so make sure you’ve backed up any important data before proceeding.
  5. Firmware Update: If the factory reset doesn’t work, you may need to update your device’s firmware. You can usually find Flash firmware updates on the manufacturer’s website.
  6. If none of these steps work, it may be best to take your device to a professional for repair or contact the manufacturer’s customer support for further assistance.
    image of info Your Personal Information is 100% secured with us. We do not save/share your data with any third party.

Here are the steps to remove a Google account from an Android device:

How To Remove Google Account  Nuu A9L S6303L Flash

If you want to remove your Google account from your device, follow these steps:

Go to your device’s “Settings” app.
Scroll down and select “Accounts” or “Accounts and Backup
Select “Google
Tap the account that you want to remove.
Tap the three dots in the top right corner of the screen.
Select “Remove account
Confirm that you want to remove the account by tapping “Remove account” again.
Note that removing a Google account from your device will also remove all of your Google-related data, such as your Gmail account, Google Drive files, and any other services you use with your Google account. Make sure to back up any important data before removing your account.

Require For Install Nuu A9L S6303L

PC & Laptop Nuu A9L S6303L Firmware
MTK USB Driver
Sp Flash Tool
USB Cable
And Your device battery should be charged high to 50%

To install Nuu A9L S6303L Firmware via SP Flash Tool, you will need to have the following:

USB driver: You need to have the USB driver for your device installed on your computer to ensure that your device can be detected and communicate with SP Flash Tool. You can download the USB driver from the manufacturer’s website or a reputable source.
SP Flash Tool: You will need to download and install SP Flash Tool on your computer. SP Flash Tool is a software application used to flash firmware onto Android devices with MediaTek (MTK) chipsets.

How To install MediaTek USB Driver and Flash Tool

Here are the general steps to install MTK USB drivers and flash tools on your computer:

  1. Download the MTK USB Driver for your device model from the internet.
  2. Extract the downloaded file to a location on your Desktop.
  3. Connect your MTK device to your computer using a USB cable.
  4. Open the Device Manager on your computer. You can do this by right-clicking on the Start menu and selecting Device Manager.
  5. In the Device Manager window, look for the “Ports (COM & LPT)” section and expand it.
  6. Right-click on “MediaTek PreLoader USB VCOM Port” and select “Update driver.”
  7. Select “Browse my computer for driver software” and then select the folder where you extracted the MTK USB driver files.
  8. Click “Next” and wait for the driver installation process to complete.
  9. Now, you can install the MTK Flash tool on your computer. Download the appropriate version of the MTK Flash tool from the internet.
  10. Extract the downloaded file to a location on your computer.
  11. Run the MTK Flash tool as an administrator and follow the on-screen instructions to start the flashing process.

That’s it! You have now installed the MTK USB drivers and flash tools on your computer and can use them to flash your MTK device. However, please note that the specific steps may vary depending on the device and the version of the

USB Driver And Flash Tool Nuu A9L S6303L

Driver & Tools is system software that is physical hardware in an Operating system or makes hardware work in OS for the user. Flashing Before Any Smart Phone On your PC You Need to Install USB Driver & flash tools Then Process Installing Firmware. Without a Driver, Your Smart Phone Will Not Detect Boot To Your Pc. So Download USB Driver, Flashing Tool, And Install Them on Your PC for ready to Installing Rom.

Nuu A9L S6303L Firmware Info:


Why is our Website Unique?

After testing all my firmware on our website, we upload it. So you can use our website’s firmware without any problem. If your desired firmware is not available on our website, you can request it on our website; we will upload your desired firmware. And if you have any problem with your device, email us, and our team representative will contact you for support.


Before flashing your device, you should back up your device. And after flashing, if your mobile has hardware problems, then your mobile will be dead. Then it would be best if you repaired EMMC. For this, you cannot misunderstand us.

Important Notes! We test and upload all firmware on our website. So we are not responsible if your Device is lost for any reason.

(Visited 14 times, 1 visits today)

Leave a Reply